Gude Expert Power Control 1105-1


Expert Power Control 1105-1. Switched PDU with integrated current metering and monitoring for TCP/IP networks, 16A

More details

Local warehouse

1 in stock

2 392 kr tax excl.

2 990 kr tax incl.


More info

Expert Power Control 1105 Series enables switching and metering of electrical appliances through TCP/IP network. The device disposes of a load outlet with safety socket at max. 16 A (Expert Power Control 1105-1) or IEC connector at max. 10 A (Expert Power Control 1105-2). This Power Port is switchable through web interface, SNMP or a button directly on the device. Two energy meters are integrated and measuring of various electrical dimensions is possible. SNMPv3, SSL, IPv6, Telnet, Radius and Modbus TCP support are incorporated.

The sensor interface allows monitoring of ambient temperature, humidity and air pressure by optional available sensors. Connected consumers can be switched by an IP watchdog through configured sensor or energy metering thresholds.


  • 1 Power Port switchable directly on the device, via HTTPS, SNMP or command line tool
  • Metering of energy, current, power factor, phase angle, frequency, voltage and active/apparent/reactive power
  • 2 energy meters, one meters continuously, the other energy meter is resettable
  • Status and power-up delay adjustable for Power Port after power blackout (0...9999 seconds)
  • Programmable turn-on/turn-off sequence (batch mode) enabling automatic switching of Power Port to previous state after configurable time period
  • Previous state of Power Port can be automatically restored after reboot of device
  • 1-channel watchdog (ICMP/TCP) can be assigned to Power Port
  • Interface for optional sensors for environmental monitoring (temperature, humidity and air pressure)
  • Dedicated high-inrush relays avoid welding of relay contacts at start-up peaks
  • Free Android App and iPhone App allow access from anywhere
  • Low internal power consumption, typ. 1.5 watts
  • Developed and manufactured in Germany


  • Dynamic IP address allocation by DHCP or manual allocation with static IP address
  • IPv6-ready
  • Firmware update over Ethernet during operations (without reboot of device or load outlet)
  • SNMPv1, v2c, v3 (Get/Traps)
  • TLS 1.0, 1.1, 1.2
  • Syslog support
  • IP Access Control List
  • Secure login through SSL
  • Configuration and control via Telnet possible
  • Radius and Modbus TCP support
  • Comfortable configuration by web browser, Windows or Linux tool
  • 10/100 Mbit/s

Data sheet

Model 1105-1
Network 1st 10 / 100Mbit RJ45
Maximum current 16 A
Features 1 x RJ45 sensor (Not included)
Weight 0.3 kg
Operating temperature 0-50 ° C